Compatible Sensors

The Captis devices is sensor agnostic to allow maximum compatibility with a range of industries, environments and uses. Listed here are sensors that have been proven to work effectively with the Captis devices. If the sensor you need is not listed, please complete the form below and our team will determine its compatibility.

Captis PulseCaptis MultiCaptis Power+
Float Switch
Input: Switch
Conductivity Sensor
Input: Modbus
4-20mA to Modbus Loop
Input: Modbus
Rain Gauge
Input: Pulse
Hydrostatic Level Transmitter
Input: Analogue or Modbus
Gas & Compressed Air Flow Meter
Input: Modbus and Pulse
Wind Speed
Input: Pulse
ORP Sensor
Input: Modbus
PLC with Modbus/Switch
Input: Modbus or Pulse
pH Sensor
Input: Modbus
Programmable Relay Control Unit
Input: Modbus or Pulse
Ultrasonic Sensor
Input: RS232

Compatible Antennas

If you are installing a Captis device underground or inside a metal cabinet, an external LTE antenna must be used. The antennas listed below are not supplied by mIoT, but have been tested for compatibility with the Captis device. If the antenna you need is not shown, please complete the form below and our team will determine its compatibility.

Poynting OMNI-501-01
- LTE Ban 700
- 698MHz - 803MHz
- 1m RTK-031 RA SMA (M)
- IP68
- 138 x 26 x 10 mm
Taoglas Cyclops WM.90
- LTE Band 700
- 698MHz - 803MHz
- 3m CFD-200 SMA(M)ST
- IP65
- L: 248mm, Ø 17mm
Taoglas Meteor FW.90
- LTE Band 700
- 698MHz - 803MHz
- SMA(M) Straight Plug
- IP65
- L 250mm, Ø 16.05mm
Taoglas Phoenix GSA.8827
- LTE Band 700
- 698MHz - 803MHz
- 1m RG-174 SMA(M)
- Not IP rated
- 105 x 30 x 7.7 mm
Taoglas T-Bar GSA.8822
- LTE Band 700
- 698MHz - 803MHz
- 3m RG-174 SMA(M)
- IP67
- 106 x 13 x 6.7 mm

Submit Sensor/Antenna for Approval

  • Max. file size: 18 MB.
  • This field is for validation purposes and should be left unchanged.

Send this to friend