Captis Multi

The Captis Multi is able to be installed in almost any environment and run multiple inputs simultaneously. The Captis is designed to be small in size; run for extended periods of time on a single battery; and be compatible for use within LTE–M and NBIoT coverage areas. The Captis Multi is available with either an Internal or External LTE antenna. Both variants are housed in the same IP68 rated enclosure.

Captis Multi Applications

  • Digital Water Metering: Measure and manage water usage in non-domestic environments.
  • Level, Pressure, Flow: Monitor water levels, measure flow of liquid or gas through critical regions in pipe networks.
  • Water Quality: Measure and monitor water quality, recording parameters such as pH, conductivity, and ORP.
  • Environmental: Measure solar radiation, rainfall, temperature, air quality and wind speed.
  • Temperature & Humidity: Monitor the ambient air temperature, rail temperature or fridge temperature, even in a power failure.
  • Infrastructure: Monitor water usage, lux, noise, vibration of entertainment precincts, construction sites etc.
  • Smart Relays: Monitor the health and performance of your equipment.
  • Controls: Control pumps, valves and alarms in response to data readings.

Providing the edge

Captis provides the edge for data measurement and monitoring and offers a smart and secure IoT solution to a range of applications.

1x Pulse 1000Hz Input

1x Digital Input
(Pulse and Switch Modes)

2x One Wire
Sensor Channels

1x Analog Input

1x RS232/485
Serial/Modbus Inputs

1x Digital Relay Output

Dual Band LTE-M


Configure OTA

Firmware Upgrade OTA

Device Management

Onboarding Process



use of all Inputs

Request a consultation

Let us know how we can help give you the edge, contact us today and one of our representatives will respond shortly

Captis range

Looking for a different solution ?
Check out the other devices in our Captis range of cellular dataloggers

Captis Pulse


Captis Metrum


Captis Multi


Send this to friend